|
Date in MSSQL 4 messages
Hi, I am going to change from Btrieve to MSSQL. I have problems with DATE fields. In Btrieve in can use 00/00/0000, in MSSQL it seems I cannot. The onyl way I find was to enable NULL. Is there another
Hi, I am going to change from Btrieve to MSSQL. I have problems with DATE fields. In Btrieve in can use 00/00/0000, in MSSQL it seems I cannot. The onyl way I find was to enable NULL. Is there another
|
By De Netwerkadviseur BV
·
|
|
How to output to PDF from XPA 3.3g on Linux 2 messages
Hello, I would like to know if anybody has succeeded in implementing PDF output From XPA on Linux and if so, how it was done. Met vriendelijke groet / Yours sincerely [De bronafbeelding bekijken] Jero
Hello, I would like to know if anybody has succeeded in implementing PDF output From XPA on Linux and if so, how it was done. Met vriendelijke groet / Yours sincerely [De bronafbeelding bekijken] Jero
|
By Jeroen Bos
·
|
|
Combo box with empty source table 5 messages
Hi, I use a combo box filled by a source table. At ItemList I put extra choices. This works fine as long as the source table has records within my range. When there are no records within my range, the
Hi, I use a combo box filled by a source table. At ItemList I put extra choices. This works fine as long as the source table has records within my range. When there are no records within my range, the
|
By De Netwerkadviseur BV
·
|
|
Import sequence for Component application 2 messages
In v4.6 I have exported 2 components and an application that uses them. The goal is to recreate the application in v4.7. I have imported both components into 4.7 and generated ecf and eci files. Now I
In v4.6 I have exported 2 components and an application that uses them. The goal is to recreate the application in v4.7. I have imported both components into 4.7 and generated ecf and eci files. Now I
|
By Arch
·
|
|
Automatic from Query to Create mode 6 messages
Hi, I am changing from v9.4 to xpa and form Btrieve to MSSQL. I experience the following: Openinging in Query mode on a table without records, I have to change to Create mode manually. In v9.4 and Btr
Hi, I am changing from v9.4 to xpa and form Btrieve to MSSQL. I experience the following: Openinging in Query mode on a table without records, I have to change to Create mode manually. In v9.4 and Btr
|
By De Netwerkadviseur BV
·
|
|
Send Mail with Magic 8.30 13 messages
How to send mail in Magic 8.30 using the latest version of outlook Regards Andres.
How to send mail in Magic 8.30 using the latest version of outlook Regards Andres.
|
By Andres Quintas
·
|
|
MSSQL database connection resilience 5 messages
Hi, Is it possible to use the “ConnectRetryCount” and “ConnectRetryInterval” in the database connection strings in Magic xPa 2.5? It looks like the string is only big enough to take one of these argum
Hi, Is it possible to use the “ConnectRetryCount” and “ConnectRetryInterval” in the database connection strings in Magic xPa 2.5? It looks like the string is only big enough to take one of these argum
|
By Jackson, Adam
·
|
|
There is already an object named '...' in the database 3 messages
Hi, First time working in MSSQL (converting from MySQL) I got this message: There is already an object named '...' in the database Do I have to rename every column-name and index-name to unique names?
Hi, First time working in MSSQL (converting from MySQL) I got this message: There is already an object named '...' in the database Do I have to rename every column-name and index-name to unique names?
|
By De Netwerkadviseur BV
·
|
|
Error Creating SQL Table from UP1.9 3 messages
I need to export some data from a Pervasive file to a MS-SQL table. I have created a duplicate of the file, corrected any field name errors and identified it with the SQL Database I am moving it to. W
I need to export some data from a Pervasive file to a MS-SQL table. I have created a duplicate of the file, corrected any field name errors and identified it with the SQL Database I am moving it to. W
|
By Jim Stephenson
·
|
|
Are handlers and record prefix/suffix abortable in online tasks ? 5 messages
I tend to create multiline RP, RS and handlers in online tasks which in turn call a series of on-line and batch tasks (The batch tasks are not abortable/allow events=no) I've come across some situatio
I tend to create multiline RP, RS and handlers in online tasks which in turn call a series of on-line and batch tasks (The batch tasks are not abortable/allow events=no) I've come across some situatio
|
By sherman levine
·
|
|
Authentication failed because the remote party has closed the transport stream
#xpa
#ria
Hi, some of our clients experience error message followed by exiting RIA application. Message is as follows : "Authentication failed because the remote party has closed the transport stream." and "The
Hi, some of our clients experience error message followed by exiting RIA application. Message is as follows : "Authentication failed because the remote party has closed the transport stream." and "The
|
By KB
·
|
|
FW: Re: [magicu-l] Send Mail with Magic 8.30
Enviado desde mi Galaxy I used that routine but with the latest version of Outlook I don't know why it doesn't send the emails, if it sends them with Outlook 2010 Regards Andres De: main@magicu-l.grou
Enviado desde mi Galaxy I used that routine but with the latest version of Outlook I don't know why it doesn't send the emails, if it sends them with Outlook 2010 Regards Andres De: main@magicu-l.grou
|
By Andres Quintas
·
|
|
XPA Clears Value Of Variable 3 messages
I have a question about a difference between UP 1.9 and XPA in the Magic Engine changing the value of a variable when control passes from a handler to Record Prefix. - A Cancel event handler has an Up
I have a question about a difference between UP 1.9 and XPA in the Magic Engine changing the value of a variable when control passes from a handler to Record Prefix. - A Cancel event handler has an Up
|
By Mike Moore
·
|
|
XPA 4.7 and Git
#git
#xpa
Hello, we just updated to xpa 4.7 coming from 2.5 we are already using github and tortoise git for other development projects not using Magic tools If I try to use version control with 4.7 it says tha
Hello, we just updated to xpa 4.7 coming from 2.5 we are already using github and tortoise git for other development projects not using Magic tools If I try to use version control with 4.7 it says tha
|
By Stefano Giusto
·
|
|
Moving App from 9.4 to XPA 3.x 13 messages
I have moved a small app from v9.4 to XPA 3 before and it works fine. I am now working on a client to get a fairly large app moved to XPA 3.x. Most of the app is fairly straightforward, so it shouldn'
I have moved a small app from v9.4 to XPA 3 before and it works fine. I am now working on a client to get a fairly large app moved to XPA 3.x. Most of the app is fairly straightforward, so it shouldn'
|
By Jim Stephenson
·
|
|
Pervasive settings on Win 10 3 messages
Hello, I am using Pervasive 10 on Windows 10 and I am trying to change settings in the "Configure Local Engine" but none of the changes are saved even though I run pcc.exe as Administrator. Does anyon
Hello, I am using Pervasive 10 on Windows 10 and I am trying to change settings in the "Configure Local Engine" but none of the changes are saved even though I run pcc.exe as Administrator. Does anyon
|
By magic9@...
·
|
|
Broker Request Dump 4 messages
Hi All, Does anybody know where the requests are saved on on magic xpa broker?Is there a dump text file where the broker is saving it? Thanks and Regards, Ronel
Hi All, Does anybody know where the requests are saved on on magic xpa broker?Is there a dump text file where the broker is saving it? Thanks and Regards, Ronel
|
By motifaithed@...
·
|
|
Crystal Reports Integration - Best Method 3 messages
What is the best way to open a Crystal Report from XPA with a "record selection formula"? I'm not sure I even want to use Crystal Reports, but if it's easy I might. TIA
What is the best way to open a Crystal Report from XPA with a "record selection formula"? I'm not sure I even want to use Crystal Reports, but if it's easy I might. TIA
|
By JK Heydt
·
|
|
Ugrade RIA to Web client ?
Hello Have people already migrated an RIA application to Web client? Can he share his experience with us? Should we review all screens? Change the programs? Thanks for your feedback
Hello Have people already migrated an RIA application to Web client? Can he share his experience with us? Should we review all screens? Change the programs? Thanks for your feedback
|
By DreamL57@...
·
|
|
create 1 program from 2 others in UP 3 messages
Hello, First I wish all of you all the best for 2021. Is it possible in UP1.9, and if so 'how', to combine 2 programs together to create 1 program ? TIA, Teun van Unen (NL)
Hello, First I wish all of you all the best for 2021. Is it possible in UP1.9, and if so 'how', to combine 2 programs together to create 1 program ? TIA, Teun van Unen (NL)
|
By Undix InformatieSystemen
·
|